The UGREEN Nexode Pro 160W is the kind of charger that makes you question why you are carrying around a separate brick for every device. It packs up to 160W of power into a compact GaN charger, gives you several ways to connect, includes its own retractable USB-C cable, and has a display that tells you exactly what is pulling power.
This is not just a basic wall charger with a bigger number printed on the box. The UGREEN Nexode Pro 160W is designed for the person with a power-hungry laptop, a tablet, a phone, and all those extra devices that somehow always need juice at the same time.
What You Get With the UGREEN Nexode Pro 160W
Right out of the box, the charger has a clean, compact look. It is a gray GaN charging brick with a front-facing digital display, an AC plug on the opposite side, and a useful mix of charging connections.
The port setup includes:
Two USB-C ports
One USB-A port
One built-in retractable USB-C cable
A digital LED power display
That built-in cable is a real convenience feature. Instead of digging through a bag for a cable every time a tablet or phone needs charging, pull out the cable, plug in, and keep moving. When you are finished, it retracts back into the charger for a much cleaner setup.
A 160W Charger That Can Handle a Demanding Laptop
The first thing I wanted to know was simple: can the UGREEN Nexode Pro 160W power a laptop that normally comes with its own 160W power adapter?
The answer from this real-world test was yes. A laptop that is known to demand serious power was connected to the charger and powered on successfully. The display started at around 1W when the cable was first connected, then climbed as the laptop began booting. Power draw rose through the teens, into the 30W range, and then higher as the system came online.
During startup, the charger showed power levels reaching roughly 58W, with the laptop continuing to run and charge once it was fully up. That is the practical test that matters. This was not just a low-power accessory getting a trickle charge. The UGREEN Nexode Pro 160W was able to bring up a demanding laptop and keep it charging.
The Smart Display Is More Than a Nice Extra
The display is where this charger separates itself from a standard power brick. When it is plugged into AC power with nothing connected, it shows the UGREEN logo and reads 0W. Once a device is attached, it displays the live wattage being pulled.
It is not a touchscreen, and honestly, it does not need to be. The point is to give you useful information at a glance, not add another menu to navigate.
With one device plugged in, the screen shows that device's power draw. Add a second device, and the screen splits to show both charging loads along with the total output. Add a third device, and it divides again, providing a readout for each connected device and the combined power being used.
That is especially useful when you are trying to figure out whether you have enough power left for one more device. Instead of guessing, you can see what the laptop, tablet, flashlight, or other accessory is actually drawing at that moment.
Charging Multiple Devices at Once
After confirming laptop charging, the setup expanded to include an older iPad Pro using the charger’s retractable USB-C cable. Once the tablet was connected, the display split into separate sections and showed both charging loads along with a total power reading.
A USB-C rechargeable flashlight was then added as a third device. At that point, the display divided into three sections, tracking the laptop, tablet, and flashlight independently. The charger continued supplying power across all three connections.
This is the real advantage of the UGREEN Nexode Pro 160W. It is not just about the headline wattage. It is about consolidating multiple charging bricks into one piece of gear while still having a clear idea of where the power is going.
Heat and Everyday Practicality
With the laptop, tablet, and flashlight connected, the charger stayed around room temperature during the test. It was not getting hot in the hand. Of course, any charger can get warmer depending on how much power is being pulled and how long it has been running, but the initial result here was solid.
One thing worth remembering is that charging demand changes constantly. A laptop near a full charge may pull far less power than it does during startup or while charging from a low battery. That is another reason the live display is useful. It shows what is happening now rather than forcing you to assume every device is drawing its maximum possible wattage.
Compact Enough to Travel With
For a 160W charger with multiple ports, an integrated cable, and a display, the size is impressive. The UGREEN Nexode Pro 160W measures approximately:
Length: 3.2 inches
Width: 2.8 inches
Depth: 1.4 inches
It is not a heavy brick either. That makes it practical for a desk setup, but it also makes sense for travel. You can bring one charger that can run a laptop, top up a tablet, and handle smaller USB-C accessories without carrying a pile of separate adapters.
Is the UGREEN Nexode Pro 160W Worth It?
If your current setup involves a laptop charger, a tablet charger, a phone charger, spare cables, and a crowded power strip, the UGREEN Nexode Pro 160W makes a lot of sense. It provides serious total output, gives you a flexible set of ports, and includes the retractable USB-C cable that is ready when you need it.
The digital display is the feature that brings it all together. You can see individual device draw, see the combined load, and make a smarter call before connecting another device. Pair that with the compact dimensions and cool initial performance, and this is a seriously capable all-in-one charging brick.
The UGREEN Nexode Pro 160W is a fantastic option for anyone who wants fewer chargers on the desk and fewer loose cables in the bag without giving up the power needed for a demanding laptop.
Check out the video review here: https://youtu.be/f5bQqCvLg08
Amazon Affiliate link: https://amzn.to/4w1AUTA